Diamond blades for cutting glass
7" blades
5/8 inch arbor
4" blades
available in 5/8 inch arbor, and 7/8 inch arbor for Plasplugs tilesaw
Blade Stiffener
for blades 6" and larger.
6" blades
quarter round profile
5/8 inch arbor
Glass coring bits
3/8 inch shaft
- 3/8 inch
- 3/4 inch
- 1 inch
- 1 1/2 inch
- 2 inch
- 2 1/2 inch
- 3 inch
Water Jacket
Diamond drills should be used at speeds between 500 and 2000 RPM.
Larger holes require slower speeds. Use a coolant ring or dam around the area to be drilled.
Never run a diamond drill dry. Cut in 5 second intervals, backing the drill up to allow coolant to flow into the cut.